MR-GE HD, HDx, HDi

1,5 Weeks, MR_TECH_002

Specially designed for Field Service Engineers working with Independent Service Organizations.

The complex, as yet understandable, MRI Physics is discussed at the very beginning of this course, to give an overal understanding of MR imaging fundementals. Equipment specific details like System, Gradient, RF, Coils, etc. follows.

Strenghtened with hands on practical sessions and lab exercises.

Special sessions like, Software Loading, cost effective host computer repair, calibration, Quality Assurance, must to have calibration tools, etc.

This course covers the following GE MRI Scanners;

- GE Signa HD 1.5T

- GE Signa HDx 1.5T

- GE Signa HDxt 1.5T

- GE Signa HDi 1.5T

MR-Siemens Symphony

1,5 Weeks, MR_TECH_003

Specially designed for Field Service Engineers working with Independent Service Organizations.

Like in all our MRI classes, MRI Physics is discussed at the very beginning of this course, to give an overal understanding of MR imaging fundementals. Equipment specific details like System, Host/Imager, RF System, Gradient System, Cooling System etc. follows.

Strenghtened with hands on practical sessions and lab exercises.

Special sessions like, Software Loading, cost effective host computer repair, must to know cooling system details,tune up, Quality Assurance, etc.

This course covers the following Siemens MRI Scanners;

- Magnetom Symphony 1.5T

MR-Siemens Concerto and C!

1,5 Weeks, MR_TECH_004

Specially designed for Field Service Engineers working with Independent Service Organizations.

Servicing open MRIs also require the knowledge of MRI Physics. So, MRI Physics is discussed at the very beginning of this course. Equipment specific details like System, Host/Imager, RF System, Gradient System, Cooling System etc. follows.

Strenghtened with hands on practical sessions and lab exercises.

Special sessions like, Software Loading, cost effective host computer repair, must to know cooling system details,tune up, Quality Assurance, mechanical shimming, etc.

This course covers the following Siemens MRI Scanners;

- Siemens Magnetom Concerto 0.23 T

- Siemens Magnetom C! 0.35T

MR-GE Magnets

1 Week, MR_TECH_005

Specially designed for Field Service Engineers working with Independent Service Organizations.

Knowing about your magnet and keeping it healthy is the key factor to keep your MRI up and running all the time.

Every year, thousands of litters of liquid helium is lost just because the MRI magnets are not looked after in the right manner. This course will teach all you need to know about GE 1.5T Magnets.

Special sessions in this course are; Cryogen System troubleshooting, Coldhead replacement, Adsorber replacement, Gradient Coil replacement, Magnet Cooldown and Vacuum (no practical session available), Magnet Monitor data capture, must to know cooling system details, etc.

Obtaining/Constructing must to have low cost magnet servicing tools will also attract your attention in this one week state of the art magnet service training.

MR-Siemens Magnets

1 Week, MR_TECH_006

Specially designed for Field Service Engineers working with Independent Service Organizations.

Knowing about your magnet and keeping it healthy is the key factor to keep your MRI up and running all the time.

Some of them being magnets working at very high cryogen pressures like 15 psi, it is very likely to loose considerable amounts of liquid helium during cooling system problems. This course will teach all you need to know about Siemens Magnets and how to keep them healthy.

Special sessions in this course are; Cryogen System troubleshooting, Coldhead replacement, Adsorber replacement, Gradient Coil replacement, Magnet Cooldown and Vacuum (no practical session available), MSUP secrets, must to know cooling system details, etc.

Obtaining/Constructing must to have low cost magnet servicing tools will also attract your attention in this one week state of the art magnet service training.

This course will mostly cover the Siemens MR Magnets, OR35, OR70 and OR105.

NM-GE Discovery ST PET/CT

1,5 Weeks, NM_TECH_003

Specially designed for Field Service Engineers working with Independent Service Organizations.

Keeping PET/CT scanners up all the time is crucial due to the fact that your high cost FDG will never wait until you fix the equipment, but decay faster than any other activity used in NM examinations.

This course will teach you how to take care of a DST PET/CT scanner, how to calibrate it at OEM standarts and how to fix it fast in case it fails.

From doing a PM, upto troubleshooting and replacing PET detector modules, all necessary information a field service engineer needs to know are covered in this 1,5 weeks high level PET/CT training.

Although this course covers most of the GE Lightspeed CT scanners, we can customize it to fulfil the needs of service engineers who already has experience on GE Lightspeed CT scanners.

This course covers the following GE PET/CT Scanners;

- GE Discovery ST (DST)